Recommended Posts

Ποσες φορες κατα τη διαρκεια overclocking λογω μη σταθεροτητας του συστηματος, μας πεταει

μπλε οθονη? (bsod)

Ορίστε λοιπόν μια λίστα με το τι πρεπει να κανουμε αναλογα με τον κωδικο που εμφανιζεται

στην μπελ οθονη.

(Το παραθέτω οπως το διάβασα στο xs...:P)

BSOD codes for overclocking

0x101 = increase vcore

0x124 = increase/decrease QPI/VTT first, if not increase/decrease vcore...have to test to see which one it is

on i7 45nm, usually means too little VVT/QPI for the speed of Uncore

on i7 32nm SB, usually means too little vCore

0x0A = unstable RAM/IMC, increase QPI first, if that doesn't work increase vcore

0x1A = Memory management error. It usually means a bad stick of Ram. Test with Memtest or whatever you prefer. Try raising your Ram voltage

0x1E = increase vcore

0x3B = increase vcore

0x3D = increase vcore

0xD1 = QPI/VTT, increase/decrease as necessary, can also be unstable Ram, raise Ram voltage

0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances

0x50 = RAM timings/Frequency or uncore multi unstable, increase RAM voltage or adjust QPI/VTT, or lower uncore if you're higher than 2x

0x109 = Not enough or too Much memory voltage

0x116 = Low IOH (NB) voltage, GPU issue (most common when running multi-GPU/overclocking GPU)

0x7E = Corrupted OS file, possibly from overclocking. Run sfc /scannow and chkdsk /r

BSOD Codes for SandyBridge

0x124 = add/remove vcore or QPI/VTT voltage (usually Vcore, once it was QPI/VTT)

0x101 = add more vcore

0x50 = RAM timings/Frequency add DDR3 voltage or add QPI/VTT

0x1E = add more vcore

0x3B = add more vcore

0xD1 = add QPI/VTT voltage

“0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances”

0X109 = add DDR3 voltage

0x0A = add QPI/VTT voltage

Oρίστε και το εν λόγω θέμα: http://www.xtremesystems.org/forums/showthread.php?t=266589

Ανανεώνεται με περισσότερες γνώμες.

Edited by Boton
  • Like 1
Link to comment
Share on other sites

εχω ενα θεμα με ενα amd συστημα τρωω 0124 bs οι μνημες δεν ειναι στανταρ γτ παιζουν κατω απο το εργοστασιακο αρα να δωσω κ αλλο vcore ? τι να δωσω ?

εδιτ μου το κανει κ σε ακυρες στιγμες αρα νομιζω οτι πρεπει να φταιει το cool n quit .

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now