p_under Posted March 14, 2012 Share Posted March 14, 2012 (edited) [NEWS_IMG=Voodoo5 6000 WaterCooling edition: Retro Love]http://www.hwbox.gr/images/imagehosting/1354de39003ba4f2.jpg[/NEWS_IMG]Retro Lovers ανά την υφήλιο ενωθείτε, ο trevormacro ξαναχτυπά! Έπειτα από μια πολύ καλή προσπάθεια ο χρήστης trevormacro παρουσιάζει την αναβαθμισμένη 3dfx Voodoo5 6000 WaterCooling Edition, μέσα από το αναλυτικό worklog του παρατηρούμε ότι ένας άνθρωπος με φαντασία και μεράκι μπορεί να κάνει αξιοθαύμαστα πράγματα. Αρχικά, γδύνοντας την κάρτα, την καθάρισε μέτρησε ακριβώς τα σημεία που θέλει να εστιάσει και κατασκεύασε ένα custom waterblock από acetal και cooper που ψύχει το HiNT chip, τους τέσσερις πυρήνες και τα memory chips. Δεν έφτανε όμως μόνο αυτό και κατασκεύασε ακόμη ένα block για την πάνω μεριά της Voodoo5 6000. Τέλος, τα components που χρησιμοποίησε για την υδρόψυξη είναι τα Swiftech Radiator, Swiftech Reservoir, Danger Den pump, τρεις Delta Fans 120 x 38 mm, G 1/4* Bitspower fittings και Danger Den hose. Φτάνει πια ας απολαύσουμε τις εικόνες οι οποίες μιλούν από μόνες τους. [img_ALT=Voodoo5 6000 WaterCooling edition: Retro Love]http://www.hwbox.gr/images/imagehosting/11204f60e99359d5e.jpg[/img_ALT] [img_ALT=Voodoo5 6000 WaterCooling edition: Retro Love]http://www.hwbox.gr/images/imagehosting/11204f60e99367ff1.jpg[/img_ALT] [img_ALT=Voodoo5 6000 WaterCooling edition: Retro Love]http://www.hwbox.gr/images/imagehosting/11204f60e99379558.jpg[/img_ALT] [img_ALT=Voodoo5 6000 WaterCooling edition: Retro Love]http://www.hwbox.gr/images/imagehosting/11204f60e993ae92f.jpg[/img_ALT] [img_ALT=Voodoo5 6000 WaterCooling edition: Retro Love]http://www.hwbox.gr/images/imagehosting/11204f60e993c409b.jpg[/img_ALT] [img_ALT=Voodoo5 6000 WaterCooling edition: Retro Love]http://www.hwbox.gr/images/imagehosting/11204f60e993d3ab8.jpg[/img_ALT] [img_ALT=Voodoo5 6000 WaterCooling edition: Retro Love]http://www.hwbox.gr/images/imagehosting/11204f60e994441f1.jpg[/img_ALT] Διαβάστε περισσότερα εδώ... Edited March 14, 2012 by p_under Link to comment Share on other sites More sharing options...
caution Posted March 14, 2012 Share Posted March 14, 2012 Καλλιτέχνης ο άτιμος! Link to comment Share on other sites More sharing options...
John-X Posted March 14, 2012 Share Posted March 14, 2012 Πο πο τι λες ρε φιλε τωρα τι εκανε ο τυπας?Τελειο. Τωρα θελει resident evil 1 και λιωσιμο. Link to comment Share on other sites More sharing options...
Astalavista Posted March 14, 2012 Share Posted March 14, 2012 Θυμάμαι ότι αυτή η κάρτα αποτελούσε dream hardware, χαίρομαι ιδιαίτερα γι αυτό το mod! Link to comment Share on other sites More sharing options...
AMDnord Posted March 27, 2012 Share Posted March 27, 2012 more photos! ειναι τρελος ο τυπας, τον αγαπάω Cutting the plate : I wanted to have copper in the logo correct. Sheet copper for the logo arrived (0.032" sheet copper). ...Working on logo now :-)... Still a little more work to do, but its getting there : The end of the "X" is 0.7mm thick.* That was no easy taskHere are the results A close up of the end of that swoosh: 0.8mm thick. A view of my backyard: An overall finished logo: Any reactions? Link to comment Share on other sites More sharing options...
George_o/c Posted March 27, 2012 Share Posted March 27, 2012 Sweeeeeeeet, το 'σκισε μιλάμε ο τύπος Link to comment Share on other sites More sharing options...
caution Posted March 28, 2012 Share Posted March 28, 2012 Εντάξει... θεούλης Link to comment Share on other sites More sharing options...
$@39@ Posted March 28, 2012 Share Posted March 28, 2012 Πανέμορφο αλλά ΓΙΑΤΙ?!!!! Link to comment Share on other sites More sharing options...
George_o/c Posted March 28, 2012 Share Posted March 28, 2012 Γιατί μπορεί Έχει μεράκι και το βγάζει στην Βούντου. Link to comment Share on other sites More sharing options...
JC_Denton Posted March 28, 2012 Share Posted March 28, 2012 Για να ρωτανε βλακες σαν εσενα ασχετε noobα Link to comment Share on other sites More sharing options...
AMDnord Posted March 29, 2012 Share Posted March 29, 2012 Συνέχεια! Rear Plastic :Voodoo5 6000 logo : First step : Front waterblock: He came across a slight problem. H can't mount the plate without covering the holes. Rear plate would cover up holes. The solution is I stick it on. I can purchase a special role of tape so I can remove it whenever I want. I can purchase some extra tape to stick the rear plate on waterblock. That is a very easy solution. Still trying to dress up the Voodoo5 plate, but here its almost finished. Both blocks are sealed watertight now. Just awaiting installation... Link to comment Share on other sites More sharing options...
$@39@ Posted March 29, 2012 Share Posted March 29, 2012 Τέλειο αλλά ΓΙΑΤΙ?!!!!!!!!!! :hehe: Link to comment Share on other sites More sharing options...
Toxic Posted March 29, 2012 Share Posted March 29, 2012 Γιατι μπορει ! Απιστευτη δουλεια παντως (Υ) Link to comment Share on other sites More sharing options...
$@39@ Posted March 29, 2012 Share Posted March 29, 2012 Ρε όντως η δουλειά του είναι απίστευτη Link to comment Share on other sites More sharing options...
Toxic Posted March 29, 2012 Share Posted March 29, 2012 Ολο αυτο για μια καρα 10ετιας και . Φαντασου να εκανε κατι αναλογο της 680 πχ . Θα φυσαγε πιο πολυ απο ολα τα υπαρχοντα μαζι Link to comment Share on other sites More sharing options...
$@39@ Posted March 29, 2012 Share Posted March 29, 2012 Θα του πω να μου φτιάξει για την 580 Lightning Link to comment Share on other sites More sharing options...
AMDnord Posted April 2, 2012 Share Posted April 2, 2012 ΣΥΝΕΧΕΙΑ! I present to you the completed front side GPU block: Voodoo5 6000 logo:Video : [media] [/media] Here is the finished plate.* He put tape on the back so I can stick it on when I want. He have been test fitting the contact of the card for hours... Bonus Time: The POWER of Delta fans: [media] [/media]3dfx waterblock leak test: [media] [/media]One word: impressive...no? The last part:Enclosing a bag of spacers (washers) that are plastic. They need to be stacked 2 high on each side of the card. The 3dfx Voodoo5 6000 Watercooling Legend Edition: Third video: Thanks for Nateman_doo. An Amazing Man... Link to comment Share on other sites More sharing options...
elhariz21 Posted April 2, 2012 Share Posted April 2, 2012 Καλά, πλάκα μας κάνει ο τυπάς! ΑΠΙΣΤΕΥΤΟ! Link to comment Share on other sites More sharing options...
George_o/c Posted April 3, 2012 Share Posted April 3, 2012 :worship2: Πραγματικά του αξίζουν πολλά μπράβο για το μεράκι του Link to comment Share on other sites More sharing options...
Astalavista Posted April 3, 2012 Share Posted April 3, 2012 Το logo της 3dfx πάντα μου φέρνει μια νοσταλγία... το μπλοκ είναι απλά κορυφή! Link to comment Share on other sites More sharing options...
kalaitzidisk Posted April 3, 2012 Share Posted April 3, 2012 απλά ΤΈΛΕΙΟ.... μπράβο σου... Link to comment Share on other sites More sharing options...
trevormacro Posted April 9, 2012 Share Posted April 9, 2012 Hello everybody, It's one of my 12 3dfx Voodoo5 6000 graphics cards. These prototypes cards are very specials and rares. I like this project because it was done by an answome man: Nateman_doo Here are the pictures: The card : I have tested the Voodoo5 6000 Watercooling Legend Edition booting without water. Just to see if the card boot... Here are results and pictures: Card and Adaptors ready to test: Assembled: Complete PC with the card: Turn ON: V5k6 Bios: Booting video: As you can see, this is a successful booting test Feel free If one administrator can ask to make an article and post it on www.hwbox.gr Thanks in advance Best Regards, Trevormacro Link to comment Share on other sites More sharing options...
George_o/c Posted April 10, 2012 Share Posted April 10, 2012 Hey man, nice to see you posting around here. Wow, you really do have 12 voodoo5 cards? Damn! You truly deserve massive congratulations for all the work you've put in this card so far Don't hesitate to post updates, we all admire your work and want to see more! Link to comment Share on other sites More sharing options...
trevormacro Posted April 10, 2012 Share Posted April 10, 2012 Hey man, nice to see you posting around here. Wow, you really do have 12 voodoo5 cards? Damn! You truly deserve massive congratulations for all the work you've put in this card so far Don't hesitate to post updates, we all admire your work and want to see more! Hello George_o/c, Thanks for your words I have 3 Voodoo Volts and 12 Voodoo5 6000 cards : - 1 Rev.2600A2 - 2 Rev.3400A3 - 9 Rev.3700A Here are my Army's pictures: - One 3700A of my cards is now Voodoo5 6000 Gold Edition and run @201 MHz instead of 166 MHz by default. I put news Sdrams 3,5 ns instead of originals 6 ns: Boot in video: [media] [/media]Link for this project: the New World Record on 3DMark2001se with one Voodoo5 6000 card: A Dream Come True : 3dfx Voodoo5 6000 Gold Second Edition @200 MHz - hwbot.org - One another 3700A of my cards is now Voodoo5 6000 Watercooling Legend Edition (on this topic). Best Regards, Trevormacro Link to comment Share on other sites More sharing options...
Astalavista Posted April 10, 2012 Share Posted April 10, 2012 (edited) Great retro stuff mate! Keep it up! Didn't these need the extra DC power? Edited April 10, 2012 by Astalavista Link to comment Share on other sites More sharing options...