Recommended Posts

[NEWS_IMG=Voodoo5 6000 WaterCooling edition: Retro Love]http://www.hwbox.gr/images/imagehosting/1354de39003ba4f2.jpg[/NEWS_IMG]Retro Lovers ανά την υφήλιο ενωθείτε, ο trevormacro ξαναχτυπά! Έπειτα από μια πολύ καλή προσπάθεια ο χρήστης trevormacro παρουσιάζει την αναβαθμισμένη 3dfx Voodoo5 6000 WaterCooling Edition, μέσα από το αναλυτικό worklog του παρατηρούμε ότι ένας άνθρωπος με φαντασία και μεράκι μπορεί να κάνει αξιοθαύμαστα πράγματα. Αρχικά, γδύνοντας την κάρτα, την καθάρισε μέτρησε ακριβώς τα σημεία που θέλει να εστιάσει και κατασκεύασε ένα custom waterblock από acetal και cooper που ψύχει το HiNT chip, τους τέσσερις πυρήνες και τα memory chips. Δεν έφτανε όμως μόνο αυτό και κατασκεύασε ακόμη ένα block για την πάνω μεριά της Voodoo5 6000. Τέλος, τα components που χρησιμοποίησε για την υδρόψυξη είναι τα Swiftech Radiator, Swiftech Reservoir, Danger Den pump, τρεις Delta Fans 120 x 38 mm, G 1/4* Bitspower fittings και Danger Den hose. Φτάνει πια ας απολαύσουμε τις εικόνες οι οποίες μιλούν από μόνες τους.

[img_ALT=Voodoo5 6000 WaterCooling edition: Retro Love]http://www.hwbox.gr/images/imagehosting/11204f60e99359d5e.jpg[/img_ALT]

[img_ALT=Voodoo5 6000 WaterCooling edition: Retro Love]http://www.hwbox.gr/images/imagehosting/11204f60e99367ff1.jpg[/img_ALT]

[img_ALT=Voodoo5 6000 WaterCooling edition: Retro Love]http://www.hwbox.gr/images/imagehosting/11204f60e99379558.jpg[/img_ALT]

[img_ALT=Voodoo5 6000 WaterCooling edition: Retro Love]http://www.hwbox.gr/images/imagehosting/11204f60e993ae92f.jpg[/img_ALT]

[img_ALT=Voodoo5 6000 WaterCooling edition: Retro Love]http://www.hwbox.gr/images/imagehosting/11204f60e993c409b.jpg[/img_ALT]

[img_ALT=Voodoo5 6000 WaterCooling edition: Retro Love]http://www.hwbox.gr/images/imagehosting/11204f60e993d3ab8.jpg[/img_ALT]

[img_ALT=Voodoo5 6000 WaterCooling edition: Retro Love]http://www.hwbox.gr/images/imagehosting/11204f60e994441f1.jpg[/img_ALT]

Edited by p_under
Link to comment
Share on other sites

more photos!

ειναι τρελος ο τυπας, τον αγαπάω :D

Cutting the plate :

429465blockprogress11.jpg

I wanted to have copper in the logo correct.

Sheet copper for the logo arrived (0.032" sheet copper).

...Working on logo now :-)...

Still a little more work to do, but its getting there :

9656253dfxlogo1.jpg

The end of the "X" is 0.7mm thick.* That was no easy task

Here are the results :)

2806713dfxlogo6.jpg

A close up of the end of that swoosh:

6279483dfxlogo7.jpg

0.8mm thick.

A view of my backyard:

9872993dfxlogo8.jpg

An overall finished logo:

5200133dfxlogo9.jpg

Any reactions?

Link to comment
Share on other sites

Συνέχεια!

Rear Plastic :

Voodoo5 6000 logo :

First step :

253601Voodoo56000logo1.jpg

Front waterblock:

910303frontblock.jpg

He came across a slight problem. H can't mount the plate without covering the holes.

Rear plate would cover up holes.

The solution is I stick it on.

I can purchase a special role of tape so I can remove it whenever I want.

I can purchase some extra tape to stick the rear plate on waterblock.

That is a very easy solution.

805308rearblock1.jpg

Still trying to dress up the Voodoo5 plate, but here its almost finished. Both blocks are sealed watertight now. Just awaiting installation...

4061732blocks.jpg

Link to comment
Share on other sites

Ολο αυτο για μια καρα 10ετιας και . Φαντασου να εκανε κατι αναλογο της 680 πχ . Θα φυσαγε πιο πολυ απο ολα τα υπαρχοντα μαζι

Link to comment
Share on other sites

ΣΥΝΕΧΕΙΑ!

I present to you the completed front side GPU block:

949022frontblock2.jpg

725848frontblock3.jpg

936040frontblock4.jpg

122401completewaterblocks1.jpg

726575completewaterblocks2.jpg

Voodoo5 6000 logo:

Video :

[media]

[/media]

944582Voodoo56000logo.jpg

Here is the finished plate.* He put tape on the back so I can stick it on when I want.

768369Voodoo56000logo2.jpg

He have been test fitting the contact of the card for hours...

320675thermalpadsonV5k6.jpg

Bonus Time:

The POWER of Delta fans:

[media]

[/media]

3dfx waterblock leak test:

[media]

[/media]

One word: impressive...no?

The last part:

Enclosing a bag of spacers (washers) that are plastic. They need to be stacked 2 high on each side of the card.

259196last1.jpg

The 3dfx Voodoo5 6000 Watercooling Legend Edition:

844091last2.jpg

522572last3.jpg

873677last4.jpg

440367last5.jpg

462591last6.jpg

Third video:

Thanks for Nateman_doo.

An Amazing Man...

Link to comment
Share on other sites

Hello everybody,

It's one of my 12 3dfx Voodoo5 6000 graphics cards.

These prototypes cards are very specials and rares.

I like this project because it was done by an answome man: Nateman_doo

Here are the pictures:

The card ::)

274866Voodoo5k6legenda.jpg

432454Voodoo5k6legendb.jpg

819138Voodoo5k6legendc.jpg

505694Voodoo5k6legendd.jpg

165419Voodoo5k6legende.jpg

900395Voodoo5k6legendf.jpg

382497Voodoo5k6legendg.jpg

921557Voodoo5k6legendh.jpg

168580Voodoo5k6legendi.jpg

537985Voodoo5k6legendj.jpg

476211Voodoo5k6legendk.jpg

325539Voodoo5k6legendl.jpg

472065Voodoo5k6legendm.jpg

413438Voodoo5k6legendn.jpg

625396Voodoo5k6legendo.jpg

751603Voodoo5k6legendp.jpg

935767Voodoo5k6legendq.jpg

883442Voodoo5k6legendr.jpg

740612Voodoo5k6legends.jpg

627097Voodoo5k6legendt.jpg

600070Voodoo5k6legendu.jpg

677598Voodoo5k6legendv.jpg

394841Voodoo5k6legendw.jpg

645727Voodoo5k6legendx.jpg

901584Voodoo5k6legendy.jpg

318348Voodoo5k6legendz.jpg

702903Voodoo5k6legendz1.jpg

659935Voodoo5k6legendz2.jpg

412284Voodoo5k6legendz3.jpg

I have tested the Voodoo5 6000 Watercooling Legend Edition booting without water.

Just to see if the card boot...

Here are results and pictures:

Card and Adaptors ready to test:

828711test1.jpg

Assembled:

468812test2.jpg

275870test3.jpg

562467test4.jpg

859464test5.jpg

519258test6.jpg

921814test7.jpg

Complete PC with the card:

817143test8.jpg

Turn ON:

191930test9.jpg

V5k6 Bios:

260561test10.jpg

Booting video:

As you can see, this is a successful booting test :)

Feel free If one administrator can ask to make an article and post it on www.hwbox.gr

Thanks in advance

Best Regards,

Trevormacro

Link to comment
Share on other sites

Hey man, nice to see you posting around here. Wow, you really do have 12 voodoo5 cards? Damn! :D

You truly deserve massive congratulations for all the work you've put in this card so far :T: Don't hesitate to post updates, we all admire your work and want to see more!

Link to comment
Share on other sites

Hey man, nice to see you posting around here. Wow, you really do have 12 voodoo5 cards? Damn! :D

You truly deserve massive congratulations for all the work you've put in this card so far :T: Don't hesitate to post updates, we all admire your work and want to see more!

Hello George_o/c,

Thanks for your words :)

I have 3 Voodoo Volts and 12 Voodoo5 6000 cards :

- 1 Rev.2600A2

- 2 Rev.3400A3

- 9 Rev.3700A

Here are my Army's pictures:

387548voodoovolts.jpg

848526Trevormacrocollectionupdated5.jpg

- One 3700A of my cards is now Voodoo5 6000 Gold Edition and run @201 MHz instead of 166 MHz by default. I put news Sdrams 3,5 ns instead of originals 6 ns:

532242DSC04702Large.jpg

Boot in video: [media]

[/media]

Link for this project: the New World Record on 3DMark2001se with one Voodoo5 6000 card:

A Dream Come True : 3dfx Voodoo5 6000 Gold Second Edition @200 MHz - hwbot.org

- One another 3700A of my cards is now Voodoo5 6000 Watercooling Legend Edition (on this topic).

Best Regards,

Trevormacro

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now