MSI Afterburner Thread!

[aRkA$]

.

MSI Afterburner Version 2.2.3

Changes list includes:

• Revised I2C access API for NVIDIA 301.xx and newer display drivers
  
• Added core, memory and auxiliary PEXVDD voltage control for custom design MSI N680GTX Lightning series graphics cards with CHL8318+uP6262 voltage regulators
  
• Added memory and VRM temperature monitoring for custom design MSI N680GTX Lightning series graphics cards with NCT7718W thermal sensors
  
• Added core, memory and auxiliary PEXVDD voltage control for custom design MSI N670GTX Power Edition series graphics cards with uP6262 voltage regulators
  

DOWNLOAD: MSI Afterburner v2.2.3

[img_ALT=MSI Afterburner 2.2.3]

http://www.hwbox.gr/images/imagehosting/24375018ee11b1f64.jpg[/img_ALT]

Edited October 26, 2012 by aRkA$

[aRkA$]

.

MSI Afterburner Version 2.2.4

Changelog:

· Added new graphics cards support

· Change the NVIDIA Kepler series voltage control mode:

DOWNLOAD: MSI Afterburner v2.2.4 | 20.2MB

[img_ALT=MSI Afterburner 2.2.4]

http://www.hwbox.gr/images/imagehosting/2437508a5bf80e22d.jpg[/img_ALT]

[Spirosssss]

Μπορεί να μου εξηγήσει κάποιος γιατί δεν σώζει την αλλαγή στα volts και με πετάει στα default όταν πατάω apply??

Μέχρι και τα περίεργα με το cfg αρχείο έκανα, αλλά τίποτα.. Να πάω σε παλιότερη έκδοση?

[aristidis]

Τι κάρτα και τι drivers έχεις ?

[Spirosssss]

Κάρτα υπογραφής και τελευταίους drivers 306.97

[aristidis]

Για την 580 πρέπει να πας σε παλιότερη έκδοση..

[Spirosssss]

ok θα δοκιμάσω και βλέπουμε thanks!

[aristidis]

ok θα δοκιμάσω και βλέπουμε thanks!

Το 220 δουλεύει με την 580 σωστά και οι καλύτεροι drivers είναι οι 285,38 και 285,58

[Spirosssss]

α οκ, γιατί μόλις δοκίμασα το 2.1 που είχα και δεν.. πάω να ψάξω το 2.2

[Spirosssss]

Δοκίμασα αρκετές εκδόσεις, μαζί και την 2.2.0 αλλά τίποτα.. Πατάω apply και τα volt γυρίζουν στο 0. Ίσως κάτι παίζει με το σύστημά μου. Φεύγω τώρα, θα δοκιμάσω και αργότερα και με άλλους vga drivers γιατί αυτούς δεν τους άλλαξα.

[aRkA$]

.

MSI Afterburner Version 2.3.0

Changes list includes:

• Added new graphics cards support.
  
• Fixed rounding error in VID generation for offset voltage control mode for CHL8318 voltage generators
  
• Now it is possible to start MSI Afterburner in limited functionality mode on the systems with no supported AMD or NVIDIA graphics card. This allows you to use hardware independent features like high-performance Predator™ video capture module on any PC, even if it is using integrated Intel graphics
  
• Added frametime graph to hardware monitoring module. The graph is displaying the maximum frame time on each sampling period and it is useful for detecting microstutters, which are invisible on averaged framerate graph.
  
• All documentation is now provided in PDF format
  
• Added unified videomemory usage monitoring implementation for Windows 8
  
• Removed obsolete GPU type selection settings for some AMD graphics card
  
• Removed obsolete shader clock monitoring for NVIDIA Kepler graphics cards
  
• Improved hardware database format, now custom design MSI graphics cards are calibrated in separate OEM file to minimize the risk of introducing typos in reference design cards definitions when updating the database
  
• MSI On-Screen Display server has been upgraded to version 4.4.0. New version gives you the following major improvements in Predator™ video capture module:
  
• • Improved RTV1 compression algorithm. New compression approach combines DXTC, RLE and uncompressed data saving algorithms and allows you to increase image quality at the cost of decreasing compression ratio, while keeping extremely fast compression performance. Please take a note that the previous RTV1 compression implementation is equal to the lowest possible 25% image quality/compression ratio balance in new implementation
    
  • Added 64-bit version of RivaTuner Video Codec. Now RTV1 videos are playable and editable in 64-bit applications (e.g. 64-bit Sony Vegas PRO or Adobe Premiere PRO CS6)
    
  • Huffman tables are no longer omitted by MJPG encoder to improve compatibility with applications using limited MJPG decoders (e.g. Sony Vegas PRO)
    
  • Now both 32-bit and 64-bit versions of RivaTuner Video Codec can optionally decode MJPG videos. Third party MJPG codec installation is no longer required to play or edit MJPG videos with omitted Huffman tables in some applications with limited MJPG decoding support (e.g. Sony Vegas PRO). MJPG decoder can be enabled in video capture compatibility properties
    
  • Multisource audio recording. Now it is possible to record audio from two independent audio sources (e.g. game audio and microphone sound) in two independent audio tracks then mix them later in video editing application (e.g. Sony Vegas PRO) or optionally mix multiple tracks in realtime during capture
    
  • Now it is possible to downmix multichannel audio to stereo in stereo rip and stereo mix modes. Previously available stereo rip mode simply rips front left and right audio channels from multichannel audio Stream, whilst new stereo mix mode merges audio from front left, right, center and surround channels
    
  • WASA Stream synchronization is now based on inserting NULL frames instead of indexing existing frames
    
  • Frame dropping implementation has been improved to provide compatibility with external VFW codecs using temporal compression and deltaframes
    
  • Now output video dimensions are always cropped to be multiples of 2 to provide compatibility with external VFW codecs
    
  • Now framerate is calculated on each frame with sliding 1000ms window approach instead of calculating it once per second
    
  • Improved rendering pipeline flushing implementation for Direct3D9 applications provides more stable framerate when capturing videos with VSync enabled
    
  • New dynamic Direct3D rendering pipeline flushing approach can decrease videocapture related performance hit when capturing videos in Direct3D applications with high rendering framerates
    
  • Added On-Screen Display support for Direct3D 10 applications in Windows 8
    
  • Added German localization
    
  • Updated profiles list
    

DOWNLOAD: MSI Afterburner v2.3.0 | 22.1MB

[aRkA$]

.

MSI Afterburner Version 3.0.0 beta 10

Changes list includes:

• Improved hardware monitoring module architecture with better extendibility
  
• Added temperature limit, power limit, voltage limit and maximum overvoltage limit graphs to hardware monitoring module for release 320 and newer NVIDIA driver. The graphs help you to understand the reasons of realtime performance limitations (e.g. reaching power target) on GPU Boost compatible graphics cards
  
• Added framebuffer, video engine and bus controller usage graphs for NVIDIA graphics cards to hardware monitoring module
  
• Added generic NVAPI videomemory usage monitoring for NVIDIA graphics cards unattached to Windows desktop (e.g. dedicated PhysX accelerators)
  
• Updated power reporting for release 320 and newer NVIDIA drivers. Now MSI Afterburner reports normalized total power according to NVIDIA recommendations
  
• Added core voltage control for reference design NVIDIA GeForce GTX 7x0 series graphics cards
  
• Added core voltage control for reference design AMD RADEON 7990 graphics cards with VT1556 voltage regulators
  
• Build number is now displayed in “i” window and in application tray icon tooltip
  
• Localizable installer files for third party translators are now included in distributive in .\SDK\Localization\Installer folder
  
• Now RivaTuner Statistics Server installer is being started by MSI Afterburner installer to make installation process easier for beginners. The server distributive is being copied to .\Redist\RTSSSetup.exe during MSI Afterburner installation, so you may always install it later if necessary
  
• RivaTuner Statistics Server has been upgraded to version 5.1.2
  
• Added new Dragoon Skins
  

DOWNLOAD: MSI Afterburner v3.0.0 beta 10, 14.8MB | Dragon Army Skins, 6.4MB

Edited May 22, 2013 by aRkA$