babismichael

Δεν ανγνωρίζει τον SSD...

Recommended Posts

καλησπέρα,

ενας φίλος αγόρασε πρόσφατα τον OCZ RevoDrive Series 120GB SSD PCI-Express x4 SSD (OCZSSDPX-1RVD0120).

τον έβαλε κανονικά σε μια pci-Ex και παρόλο που στο bios τον βλέπει,

Μέσα στα windows δεν υπάρχει... ούτε καν στην διαχείριση δίσκων...

Οποιος έχει καμια ιδέα...

Ευχαριστώ.

Υ.Γ. το σύστημα:

MSI Eclipse SLI (s1366, DDR3, X58)

Intel Core I7-950

KINGSTON DDR3 4GB (2X2GB) PC12800 1600MHZ

Sapphire 5870 SVGA

Link to comment
Share on other sites

Το έχω πάθει πάρα πολλές φορές με ssd και τη συγκεκριμένη μητρική, χωρίς να λέω ότι φταίει 100% αυτή. Δοκιμάστε να κάνετε μια νέα εγκατάσταση λειτουργικού σε αυτόν τον δίσκο μόνο ;)

Link to comment
Share on other sites

Απλώς δοκίμασε αυτό που σου είπα...

Ρε χαλβά μην έισαι εριστικός και απόλυτος !!! :hehe:

Το παιδί έχει PCI-e SSD και όχι Sata όπως εσύ !!!

Εδώ λέει αυτά με μικρά γράμματα :

Note: Before installing the RevoDrive it is important to check the settings/capabilities on your motherboard. If you plan on using the RevoDrive as a boot drive please check that your motherboard supports boot over PCI-E. Please check with your motherboard manufacturer for the latest platform information and BIOS updates. If you have any installation or compatibility questions about the RevoDrive, please visit our forums or call OCZ Customer Service for recommendations.

While the RevoDrive will simply plug and play for the vast majority of platforms, the following issues may arise when installing on these particular motherboards:

-Asus Crosshair IV – Please check with motherboard manufacturer for BIOS update to enable boot over PCIe.

-Biostar T-Power I45: RevoDrive is only detected in Slot 1 AND only if a PCIe GPU is used.

-DFI DK-X58-T3EH6: Not detected in PCIe Slot 2 (x4 slot).

-EVGA X758 SLI – Please check with motherboard manufacturer for BIOS update to enable Boot over PCIe.

-Gigabyte GA-890FXA-UD7 Not detected in slots 1,3,4 (it is detected in 2,5,6)

-XFX 780i SLI – Bios must be upgraded to P09 (or later).

Μάλλον πρέπει να ανοίξετε κανα ψάξιμο στο forum της OCZ :)

Link to comment
Share on other sites

Όχι ρε δεν είμαι εριστικός. Απλώς ανέφερε πιο πάνω ότι βλέπει κανονικά στο bios τον δίσκο αλλά δεν τον βλέπει στα windows. Οπότε αν κάνει μια καθαρή εγκατάσταση θα τον βλέπει κανονικά και με το νόμο :)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now